These hatches are ideal for access to storage compartments on board and ideal for inspecting fuel lines, electrical cables, control cables, battery switches and so on. They are suitable for installation in splash areas, such as the the transom well.
The 125mm and 150mm versions hatches are certified to ISO12216, meeting the strength and waterproofing standard required for small craft hatches. The 100mm version is not certified, but is built to the same specifications.
The hatch cover has a low-profile design with hidden screws for a smart appearance.
The hatches have a deep frame (approx 22.5mm) to give them strength and they can be used in areas where they may occasionally be stepped on, eg transom wells - but we advise against installation in locations where they would be regularly stepped on.
The hatch cover has a non-slip finish so can be used on deck.
The hatches have a rubber o-ring to make them water-tight (approximately IPX6).
While these hatches are water-tight, they can not be used under the waterline and similarly they should not be used to hold back fluids as they may not be 100% watertight, for example if the o-ring is disturbed by debris.
While they can be installed in the top of a water or waste tank (but above the fluid level), they should not installed in a fuel tank as the o-ring may become degraded by fuel and no longer function.
The hatches made of tough, UV-resistant ABS plastic and are designed for external use.
Dimensions
- Internal diameter: 150mm
- Cut-out diameter: 165mm
- Overall diameter: 205mm
- ISO certified: YES
Part reference: 195382